Essential Tips – Page 7 – Loganalogy- Your Family Historian

A Beginner’s Guide

Have you ever looked at other family trees online? I have, and they are pretty interesting. You can certainly tell the beginners from someone who has been doing it a long time. I am not judging, not harshly, anyway, because I was a beginner, too.

If people use the trees only for aesthetic value, they can insert their ancestors’ names in the way they like. However, if you are using an online service and expecting hints or assistance from DNA matches, it’s essential to input names and dates correctly.

Here are the rules for correctly recording names in genealogy.

USE WOMEN’S MAIDEN NAMES. Always enter a woman’s maiden name if you have it (her surname at birth) in parentheses on a written/typed chart or a database’s last name field. When you do not know a female’s maiden name, insert her first and middle name on the chart, followed by empty parentheses (). For example, to record Sara Elizabeth, whose maiden name is unknown and who is married to John ROWAN, write “Sara Elizabeth ()” or “Sara Elizabeth () ROWAN.” When using a database such as Ancestry, MyHeritage, or Family Search, use the maiden name in the last name field. If you do not know the maiden name, leave it blank.

UNKNOWN NAMES. Do not put “LNU,” (Last Name Unknown), “UNK,” (Unknown), “MNU,” (Middle or Maiden Name Unknown) as these databases do not pick those up as you mean them. UNK is an absolute last name in Dutch. LNU is Vietnamese (Lưu) from the Chinese surname 劉 in central and southern Vietnam. It is the Chinese variant of Lu or Liu. When it comes to names you do not know, you accept that you do not know it and leave the field blank or use () on a typed or written chart.

NAMES IN SEARCH ENGINES.

Ancestry: For better search results, provide more information for the search engine to match against. For example, specifying a middle name like “Lemuel” can help narrow down results when searching for someone with a common name like “John Smith.” There are fewer John Lemuel Smiths globally than John Smiths. Ancestry automatically considers common nicknames, abbreviations, and alternate spellings. An example of their tips is that a search for “Bill Smith” could also return results for “William Smith,” “Wm Smith,” “Bill Smyth,” or “B. Smith.” An exact name match is the most relevant, followed by common misspellings, nicknames, and other variations. Remember that names can be misspelled or mistranscribed in original records or indexes, so looking for alternate spellings may lead to the right match despite the name appearing incorrect.

Family Search: They state, “The more of a surname you type as a search term, the smaller the results list will be. Since many surnames have spelling variations, you may want to broaden your search. To do this, you can type only part of the surname. (Or truncating your search.) For example, if you type “Newcombe” as your search term, the computer will find only that spelling of the name. However, if you type “Newcom” as your search term, the computer will find any surname that begins with those letters, including Newcom, Newcomb, Newcome, Newcombe, and so forth.”

My Heritage: When typing in the name in their fields, advanced options appear and allows you to specify whether you want an exact match, whether to include spelling variations, matching initials, and so on.

The critical takeaway is to take a few minutes at the beginning of your search and learn how the particular database search functions. Most sites have a tips section.

RECORD NAMES IN THEIR NATURAL ORDER.—first, middle, last (surname/maiden name). Using full names whenever possible makes lineage easier to trace. If a middle name is unknown, you may use an initial if you have one. Write names just as they appear on a birth certificate or spoken aloud upon introduction; no commas are necessary.

LAST NAMES. In the computer world, typing in all capital letters is considered yelling. Most genealogists choose to print surnames in all capital letters. Capitalizing the last name is a matter of preference rather than correctness. However, capitalized last names make it easier to read and distinguish surnames from first and middle names on family trees and in publications.

NICKNAMES AND ALTERNATE NAMES. Most databases have a separate field for nicknames or “also known as” names. You should not put them in the main name fields. If using written or typed charts, include them in quotes after the first given name. If the nickname is customary (i.e., Dan for Daniel), it is unnecessary to record it because only more unique nicknames need to be written (i.e., Esther “Hettie” HAWK.) If a person is known by multiple names, perhaps due to adoption or a non-marital name change, include all alternate names in parentheses after the surname on charts or a written tree. Clarify this with an “a.k.a.”, also known as, before the full alternate name, so that anyone reading your chart understands that the following is an alternate name. An example is Johann Leopold SCHWITTKOWSKI (a.k.a. John Paul HENNIG). Record it even when parts of the name are the same.

ALTERNATE SPELLINGS. When researching your ancestor’s surname, consider alternate spellings, particularly if the spelling has changed throughout time. There are several reasons why a last name might have been altered, such as illiteracy. It was common for ancestors who could not read or write to spell their last name phonetically, based on how it sounds, and this often led to slight variations between generations. When documenting surname usage, start with the earliest known usage, followed by all later known variations. For example, as in my family tree, you would write John LOGEN/LOGGAN/LOGAN or Johann SCHWITTKOWSKI/ HENNIG.

MAKE NOTES. Most databases have a place where you can insert notes. When recording names in your family tree, write notes or use the notes field. Specify unusual or confusing details for clarity. For instance, if a female ancestor’s maiden name is the same as her husband’s surname, briefly note why you have entered the same last name twice for her. Explaining prevents others from assuming it’s a mistake and helps them understand its reasoning.

Adhering to these straightforward guidelines ensures that your genealogical data is sufficiently clear for others to comprehend.

💁‍♀️EXTRA TIP: Are you finding the best search results for locating your ancestors? Did you know that misspellings and transcription errors limit your search? Unsure about the spelling of your ancestor’s names in records?

It’s time to try a wildcard search!

One of the best search secrets is using wildcard characters like “*” or “?” to substitute for letters you don’t know or are unsure of. When you use these characters in a search, it instructs the search engine (such as Google or Ancestry) to consider any letter in that position as a match.

Before using the genealogy wildcard search, remember that “*” replaces zero to multiple characters, while “?” replaces just one character. Read the search tips section for the database you use for their wildcard characters.

Read my tips and tricks on Maximizing Your Genealogy Research with Google: Proven Strategies for Effective Online Searches for your family history research.

Microsoft Designer AI

Lately, I have been helping several people with their family history. One thing that they have in common is the same issue I ran into when I first started. They did not take full advantage of the document hint that was given to them when they were researching.

For instance, a man and I had both located a census on his relative. He took it at face value, only looking at the page that, in this instance, Ancestry® had provided. It showed the page of his ancestor and their children. However, when I looked at the same document, I found the wife’s family in the same census record. How? By using the back and forward arrows to look at the other pages in the census.

Most families tended to stay in the same neighborhood if not living together. In this case, they were neighbors. I’ve found that both sides of the family were neighbors up and down the street. Of course, with the inventions of cars, airplanes, and other transports, this won’t be the case for our generations and those that come after us; we move around more often.

Another common mistake is looking at the index only for information rather than the whole record. For instance, take this death record of my great-grandmother, Caroline Stitt Logan. The index shows her relevant details, such as her date of birth, date of death, etc.

But, if you click on the document, it shows her cause of death, the informant for the certificate (my great-grandfather signed it), where they lived, where her parents were from, and where her burial was.

Another example is this obituary that came up under Caroline’s name. If you only go by this index, then you would think that it is the obituary for Caroline, but it is not. It is for her father, William.

Click on the obit and look at all the information we have. It lists William’s father’s name and William’s children with their married names.

The most fascinating records to do this with are passenger lists and immigration paperwork. Not only can the passenger list tell you where your ancestor is going, but it can tell you where they are from and whom they are visiting. Some immigration paperwork will list family names, birth dates, etc. Depending on the time frame, you may even get a picture of the immigrant.

Dissect every document you can get your hands on. You never know what you may discover.

But what if there is no image to click on when you find an index? Look at the film number or the “source information” at the bottom of the index. For instance, here is the index for Elizabeth Hennig.

There is no document to click on and dissect. But, there is “Source Information.”

The source information tells me that the original data can be found in FamilySearch. After pulling up FamilySearch.org, click “Search” and “Records.” Then “Restrict Records By” “Film Number.” Enter the film number found on the Ancestry index. In this case, it is film number 527772. Once there, you click on the link it provides and then the film number from the index.

Click on the magnifying glass next to the record your researching, in this case, the 527772.

It would help if you remembered that humans indexed and scanned these records. Sometimes there is no rhyme or reason for how they scanned the images. If you are lucky, they are by date, but sometimes they are scanned in randomly. It would serve you well if you were patient.

Then go back, as you have been doing, and look at older records that you may have placed an index hint to and see if you can get more information from that source. You may be surprised!

Good luck! Let me know if you need assistance.

As an Amazon Associate, I earn from qualifying purchases.